Search This Supplers Products:Wave Soldering MachineSoldering RobotReflow OvensSolder Dross SeparatorSelective Soldering MachinePCB Loader
US $10.001 - 2 set
Packging & Delivery
Min Order1 set
Briefing
Detailed
Lengthening the each heating zone and minimize the space between each zone so that significantly improve the uniformity and efficiency of heating.
● Temperature controlling independently & air velocity adjustable to meet high-precision soldering requirements.
● The heating efficiency was improved by 10% through adopting new air management system to get smaller △T; The forced exhaust system with filters which is easy to be clean
● Forced convection cooling system to easily reach the requirements of strict lead free soldering processes.
Mechanism Configuration
● Up-cover can be wholly opened automatically, sate and easy to clean the chamber.
● Tailor-made rails to keep no deformation in long-terms.
● High efficient convective air management, enhance the flow of hot air in circulation. Quickly warming up with high efficient heat compensation.
● Mesh & rail keep the same pace; equipped with high quality timing motor, closed-loop controlled by computer, running stably.
● Adopted timing motor to adjust the width of rails, which is controlled by operation panel.
Heating Cooling System
Lengthening the each heating zone and minimize the space between each zone so that significantly improve the uniformity and efficiency of heating.
Temperature controlling independently & air velocity adjustable to meet high-precision soldering requirements.
The heating efficiency was improved by 10% through adopting new air management system to get smaller T; The forced exhaust system with filters which is easy to be cleaned.
Forced convection cooling system to easily reach the requirements of strict lead free soldering processes.
Options
Nitrogen System
● Low nitrogen consumption design. When nitrogen consumption is 20-30m3/h, the oxygen concentration can be controlled within 450-1000ppm.(Includes water cooling system、Flux reclaim system、nitrogen flow meter and Oxygen analyzer)
Outside Water Chiller
Outside water chiller and easy for maintenance.
Specification
Model | US-800 | US-1000 | MVD-0802 | MVD-1002 | |||
Outside dimension (L*W*H) | 5598*1359*1391mm | 6100*1353*1490mm | 5600*1525*1460mm | 6100*1535*1460mm | |||
Standard color | Grey | Grey | Grey | Grey | |||
Weight | Apporx .2250kg | Apporx .2450kg | Apporx .2500kg | Apporx .2750kg | |||
Number of heating zones | Up 8/bottom 8 | Up 10/bottom 10 | Up8/bottom8 | Up 10/bottom 10 | |||
Length of heating zones | 3200mm | 3891mm | 3200mm | 3891mm | |||
Number of cooling zones | 2 (inner) | ||||||
Exhaust volume | 10m3/min*2 exhaust | ||||||
Control system | |||||||
Electric supply required | 3 phase ,380V 50.60HZ (option :3 phase ,220v 0/60hz ) | ||||||
Electric power required | 60KW | 80KW | 64KW | 80KW | |||
Startup power | 30KW | 36KW | 32KW | 38KW | |||
Power consumption | 8 KW | 9 KW | 10KW | 11KW | |||
Warming time | About 25minute | ||||||
Temp setting range | Room temp 300℃ | ||||||
Temp control method | PID close loop control +SSR/driving | ||||||
Temp control precision | ±1.0℃ | ||||||
Temp deviation on PCB | ±1.5℃ | ||||||
Heating element | Especial heating elements for long life | ||||||
Max temp gap between preheat &reflow setting | 80℃ | ||||||
Max temp gap between preheat zone setting | 40℃ | ||||||
Max temp gap between reflow zones setting | 50℃ | ||||||
Data storage | Process date and status storage (80GB) | ||||||
Abnormal alarm | Abnormal temperature (extra-high /extra-low temp) | ||||||
Board dropped alarm | Tower light:yellow -warming ,green-normal ,red -abnormal | ||||||
Conveyor system | |||||||
Rail structure | Subsection integrated type,subsection separate control (option) | ||||||
Max width of PCB | 400mm (option:600mm) A and B lanes width each 250mm or 1 lane 450mm and other lane 50mm | ||||||
Components heigh | 25mm ,top/bottom clearance of PCB is 25mm | ||||||
Conveyor direction | L-R(option:R-L) | ||||||
Fixed rail side | Front fixed (option: end fixed) | 1.4 rail fixed 2.3 rail fixed | |||||
PCB transmission way | Air -reflow =chain +mesh , N2 -Reflow=chain (mesh is option) | ||||||
Conveyor height | 900±20mm | ||||||
Conveyor speed range | 300-2000mm/min | ||||||
Lubrication auto-afflux | Standard | ||||||
Cooling method | Air cooling (standard) water cooling (option) | ||||||
Model for nitrogen process | US-800-N/US-1000-N | MVD-800-N/MVD-1000-N | |||||
Nitrogen consumption | 300ppm -1000ppmm(O2 concentration) , with N2 flow rate meter | ||||||
Flux management system | Flux reclaimed and filtration standard for N2 oven ,easy clean up | ||||||
Water chiller | 3HP , External stand-alone type | ||||||
Standard for N2 oven model with suffix of''-N'' |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.